Altera PHYLite Manual do Utilizador Página 40

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 61
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 39
Input Path Signals
Table 20: Input Path Signals
Input path signals are signals that are available when you set the Pin Type parameter to Input or Bidirectional.
Signal Name Direction Width Description
data_to_core Output
Quarter-rate DDR: 8 x PIN_WIDTH
Half-rate DDR: 4 x PIN_WIDTH
Full-rate DDR: 2 x PIN_WIDTH
Quarter-rate SDR: 4 x PIN_WIDTH
Half-rate SDR: 2 x PIN_WIDTH
Full-rate SDR: 1 x PIN_WIDTH
Valid on rdata_valid. Synchro‐
nous to the core_clk output from
the IP core.
rdata_en Input
Quarter-rate: 4
Half-rate: 2
Full-rate: 1
Held high for the number of
expected read words after a read
command. Synchronous to the
core_clk output from the IP core.
rdata_valid Output
Quarter-rate: 4
Half-rate: 2
Full-rate: 1
Delayed by READ_LATENCY with
margin and aligned to the core
clock rate. For example, in
quarter-rate, the delay will be a
multiple of 4 external clock cycles.
Synchronous to the core_clk
output from the IP core.
data_in/
data_io
Input/
Bidirectiona
l
1 to 48 if data configuration is
Single Ended
1 to 24 if data configuration is
Differential
Data input from pin. Synchronous
to the strobe_in or strobe_io
input.
If the pin type is set to Input, the
data_in ports are used. If the pin
type is set to bidirectional, the
data_io ports are used.
data_in_n/
data_io_n
Input/
Bidirectiona
l
1 to 24 Negative data input from pin
enabled when data configuration
is set to Differential. Data is
synchronous to the strobe_in or
strobe_io input. If the pin type is
set to Input, the data_in_n ports
are used. If the pin type is set to
bidirectional, the data_io_n
ports are used.
40
Input Path Signals
ug_altera_phylite
2015.01.16
Altera Corporation
Altera PHYLite for Parallel Interfaces IP Core User Guide
Send Feedback
Vista de página 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 60 61

Comentários a estes Manuais

Sem comentários