Altera DQ (ALTDQ) Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 31
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
Page 2 Introduction
DQ (ALTDQ) and DQS (ALTDQS) Megafunctions November 2010 Altera Corporation
Stratix
®
Stratix GX
Stratix II
Stratix II GX
ALTDQ Megafunction
The ALTDQ megafunction allows you to easily configure the DDR I/O elements in
supported Altera devices for DQ data signal functionality. The ALTDQ megafunction
is a variation of the ALTDDIO_BIDIR megafunction modified to be used with the
ALTDQS megafunction.
The ALTDQ megafunction implements a DDR interface and offers many additional
features, which include:
Transmission and reception of data on both edges of the reference clock
ddioinclk
clock input for the negative-edge input register (available for Stratix II
devices only)
Active high asynchronous clear and clock-enable control inputs
Registered or unregistered output-enable input
ALTDQS Megafunction
The ALTDQS megafunction allows you to easily configure the I/O elements of the
data strobe (DQS) in supported Altera devices.
You typically use the ALTDQS megafunction used with the ALTDQ megafunction
which provides the following features:
A group of DQS pins used to strobe the read and write data in external DDR
memory interfaces using a common DLL to phase shift the read strobe
Implementing one DLL and a number of user-specified DQS pins (the maximum
number of DQS supported by a DLL is also dependent on the device side)
Clocks generated for the DQ negative-edge input registers from the DQSn pins
that is the
dqddioinclk[]
signal (available for Stratix II devices only)
Delay buffer setting output option
Frequency settings of DQS inputs and system reference clock
Active-high asynchronous clear and clock-enable control inputs
Registered or unregistered output-enable input
DQS outputs configurable as open drain mode
Speed setting of the DQS and delay buffers as either low or high (available for
Stratix II devices only)
Vista de página 1
1 2 3 4 5 6 7 ... 30 31

Comentários a estes Manuais

Sem comentários