Altera Transceiver SI Manual do Utilizador descarregar pdf (Página 17)

Altera Corporation Getting Started User Guide 2–9

June 2006 Transceiver Signal Integrity Development Kit, Stratix II GX Edition

Getting Started

Power Supply Cable

Connect the power cable to the board and plug the other end into a power

outlet. To power up the board, place the power switch (S10) in the ON

position. When power is supplied to the board, the LED (D13)

illuminates.

After the board powers up, the on-board flash memory, which ships

pre-programmed with the factory design, automatically configures the

Stratix II GX device. The CONF DONE LED (D14) illuminates, signaling

that the Stratix II GX device is configured.

1 If the board does not power up after the power cable is

connected, make sure that the power switch (S10) is in the ON

position.

Setting the Clock

Circuit Switches

Set the DIP switch S8 and slide switch S9 per the instructions listed in

Table 2–2.

1 To use the on board oscillator, the slide switch (S9) needs to be in the OSC

position. However, to use the SMA connectors J5 and J6, the slide switch

needs to be in the SMA position. The I/O standard of the pattern generator

should be set to LVPECL, LVDS, LVHSTL, SSTL, or the HCSL level.

Table 2–2. Setting the Clock Circuit Switches, Note (1)

S8-1, S8-2, and PCIe Clk S8-3, S8-4 and PCIe Clk S8-5 and PCIe Clk S8-6 and Basic Clk

S8-1 S8-2

PCIe Clk

(U5)

S8-3 S8-4

PCIe Clk

(U5)

S8-5

PCIe Clk

(U5)

S8-6

Basic Clk

(U8)

Low Low 25 MHz Low Low ±25% High Enable High Enable

High Low 100 MHz High Low -0.5% Low Disable Low Disable

Low High 125 MHz Low High -0.75% ————

High Low 200 MHz High High No

spread

————

Note to Ta bl e 2 – 2:

(1) When using the clock speed DIP switch bank (S8), set switches 1-5, 7, and 8 in the closed position, and switch 6 in

the open position.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Comentários a estes Manuais

Sem comentários

Altera Transceiver SI Manual do Utilizador Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Altera Transceiver SI