Altera Cyclone V GX FPGA Manual do Utilizador descarregar pdf (Página 35)

Appendix A: Programming the Flash Memory Device A–5

Restoring the MAX V CPLD to the Factory Settings

October 2012 Altera Corporation Cyclone V GX FPGA Development Kit

User Guide

nios2-terminal r

and follow the instructions in the terminal window to generate a unique MAC

address.

f To ensure that you have the most up-to-date factory restore files and information

about this product, refer to the Cyclone V GX FPGA Development Kit page of the

Altera website.

Restoring the MAX V CPLD to the Factory Settings

This section describes how to restore the original factory contents to the MAX V

CPLD on the FPGA development board. Make sure you have the Nios II EDS

installed, and perform these steps:

1. Set the board switches to the factory default settings described in “Factory Default

Switch Settings” on page 4–2.

1 DIP switch SW5.1 includes the MAX V device in the JTAG chain.

2. Launch the Quartus II Programmer.

3. Click Auto Detect.

4. Click Add File and select <install

dir>\kits\cycloneVGX_5cgxfc7df31_fpga\factory_recovery\max5.pof.

5. Turn on the Program/Configure option for the added file.

6. Click Start to download the selected configuration file to the MAX V CPLD.

Configuration is complete when the progress bar reaches 100%.

f To ensure that you have the most up-to-date factory restore files and information

about this product, refer to the Cyclone V GX FPGA Development Kit page of the

Altera website.

1 2 ... 30 31 32 33 34 35 36 37 38

Sem comentários

Altera Cyclone V GX FPGA Manual do Utilizador Página 35