Altera 100G Development Kit, Stratix V GX Edition Manual do Utilizador descarregar pdf (Página 15)

Chapter 4: Development Board Setup 4–3

Factory Default Switch Settings

August 2012 Altera Corporation 100G Development Kit, Stratix V GX Edition

User Guide

To restore the switches to their factory default settings, perform the following steps:

1. Set DIP switch bank (SW2) to match Table 4–1 and Figure 4–1.

2. Set DIP switch bank (SW3) to match Table 4–2 and Figure 4–1.

Table 4–1. SW2 Dip Switch Settings

Switch

Board

Label

Function

Default

Position

0 MSEL 0

Switch 0 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Closed

1 MSEL 1

Switch 1 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Closed

2 MSEL 2

Switch 2 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Open

3 MSEL 3

Switch 4 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Closed

4 MSEL 4

Switch 4 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Open

5—

Switch 4 has the following options:

■ Open = Logic 1

■ Closed = Logic 0

Closed

Table 4–2. SW3 DIP Switch Settings (Part 1 of 2)

Switch

Board

Label

Function

Default

Position

1 USB_DISABLEN

Switch 4 has the following options:

■ When off (1), USB is enabled.

■ When on (0), USB is disabled.

2 DIFFCLKA_SEL

Switch 4 has the following options:

■ When off (1), SMA is selected.

■ When on (0), PLL is selected.

3 REFCLKA_SEL

Switch 3 has the following options:

■ When off (1), SMA is selected.

■ When on (0), PLL is selected.

4 DIFFCLKB_SEL

Switch 4 has the following options:

■ When off (1), SMA is selected.

■ When on (0), PLL is selected.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comentários a estes Manuais

Sem comentários

Altera 100G Development Kit, Stratix V GX Edition Manual do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Altera 100G Development Kit, Stratix V GX Edition