Altera MAX 10 Embedded Memory Manual do Utilizador descarregar pdf (Página 14)

Output Read Data in Simultaneous Read and Write

If you perform a simultaneous read/write to the same address location using the read or write clock mode,

the output read data is unknown. If you want the output read data to be a known value, use single-clock

or input/output clock mode and then select the appropriate read-during-write behavior in the RAM: 1-

PORT and RAM: 2-PORT IP cores.

Related Information

MAX 10 Embedded Memory Clock Modes on page 2-9

Independent Clock Enables in Clock Modes

Table 2-3: Supported Clock Modes for Independent Clock Enables

Clock Mode Description

Read/write Supported for both the read and write clocks.

Independent Supported for the registers of both ports.

MAX 10 Embedded Memory Configurations

Table 2-4: Maximum Configurations Supported for M9K Embedded Memory Blocks

Feature M9K Block

Configurations (depth × width)

8192 × 1

4096 × 2

2048 × 4

1024 × 8

1024 × 9

512 × 16

512 × 18

256 × 32

256 × 36

Port Width Configurations

The following equation defines the port width configuration: Memory depth (number of words) × Width

of the data input bus.

2-10

Output Read Data in Simultaneous Read and Write

UG-M10MEMORY

2015.05.04

Altera Corporation

MAX 10 Embedded Memory Architecture and Features

Send Feedback

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 70 71

Sem comentários

Altera MAX 10 Embedded Memory Manual do Utilizador Página 14