Altera Arria V GX Manual do Utilizador descarregar pdf (Página 20)

4–4 Chapter 4: Starter Board Setup

Factory Default Switch Settings

Arria V GX Starter Kit November 2014 Altera Corporation

User Guide

4. Set DIP switch bank (SW4) to match Table 4–4 and Figure 4–1.

f For more information about the FPGA board settings, refer to the Arria V GX Starter

Board Reference Manual.

3USER2

Switch 3 has the following options:

■ When ON, a logic 0 is selected.

■ When OFF, a logic 1 is selected.

OFF

4USER3

Switch 4 has the following options:

■ When ON, a logic 0 is selected.

■ When OFF, a logic 1 is selected.

OFF

Table 4–4. SW4 Dip Switch Settings

Switch

Board

Label

Function

Default

Position

1 CLK_SEL

Switch 1 has the following options:

■ When ON, a logic 0 is selected, SMA input clock select.

■ When OFF, a logic 1 is selected, Programmable oscillator

clock select.

OFF

2 CLK_EN

Switch 2 has the following options:

■ When ON, a logic 0 is selected, on-board oscillator

disable.

■ When OFF, a logic 1 is selected, on-board oscillator

enable.

OFF

3 FAC_LOAD

Switch 3 has the following options:

■ When OFF, a logic 1 is selected, load the factory design of

Arria V device from flash at power up.

■ When ON, a logic 0 is selected, load the user design from

flash at power up.

OFF

4 RESERVED Switch 4 has no function. OFF

Table 4–3. SW3 Dip Switch Settings (Part 2 of 2)

Switch

Board

Label

Function

Default

Position

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comentários a estes Manuais

Sem comentários

Altera Arria V GX Manual do Utilizador Página 20

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Altera Arria V GX